|
Rocker Switches
A8L Miniature Rocker Switch
Miniature Rocker Switch for High Capacity Switching
- Withstands inrush currents up to 100 A with a unique switching mechanism.
- Soft touch with firm switching action.
- Easy to mount by snap fitting.
- Contact gap of 3 mm minimum.
- UL and cUL standards approved. Conforms to EN standards.
 |
|
|
|
|
|
Updated October 24, 2011
|
This web page provides an excerpt from a datasheet. Refer to Datasheetand other applicable documents for more information.
| Contact Form |
SPST
 |
Quantity
per box |
| Terminals |
Solder terminals |
PCB terminals |
Right-angled
PCB terminals |
Left-angled
PCB terminals |
Quick-connect
terminals #187 |
| Color of caps and cases |
Black |
Black |
Black |
Black |
Black |
Marking
on caps |
Without markings |
A8L-11-11N1 |
A8L-11-12N1 |
A8L-11-13N1 |
A8L-11-14N1 |
A8L-11-15N1 |
300 |
 |
A8L-11-11N2 |
A8L-11-12N2 |
A8L-11-13N2 |
A8L-11-14N2 |
A8L-11-15N2 |
 |
A8L-11-11N3 |
A8L-11-12N3 |
A8L-11-13N3 |
A8L-11-14N3 |
A8L-11-15N3 |
 |
A8L-11-11N6 |
A8L-11-12N6 |
A8L-11-13N6 |
A8L-11-14N6 |
A8L-11-15N6 |
| Contact Form |
DPST
 |
Quantity
per box |
| Terminals |
Solder terminals |
PCB terminals |
Right-angled
PCB terminals |
Left-angled
PCB terminals |
Quick-connect
terminals #187 |
| Color of caps and cases |
Black |
Black |
Black |
Black |
Black |
Marking
on caps |
Without
markings |
A8L-21-11N1 |
A8L-21-12N1 |
A8L-21-13N1 |
A8L-21-14N1 |
A8L-21-15N1 |
300 |
 |
A8L-21-11N2 |
A8L-21-12N2 |
A8L-21-13N2 |
A8L-21-14N2 |
A8L-21-15N2 |
 |
A8L-21-11N3 |
A8L-21-12N3 |
A8L-21-13N3 |
A8L-21-14N3 |
A8L-21-15N3 |
 |
A8L-21-11N6 |
A8L-21-12N6 |
A8L-21-13N6 |
A8L-21-14N6 |
A8L-21-15N6 |
Specifications
Ratings
| Rated load |
Non-inductive |
Inductive |
| Resistive load |
Lamp load |
Inductive load |
Inductive motor load |
| 125 VAC |
10 A |
10 A |
8 A |
8 A |
| 250 VAC |
10 A |
10 A |
8 A |
8 A |
| Note: |
1. |
The non-inductive lamp load has an inrush current 10 times steady current. |
|
2. |
The inductive load has a power factor of 0.4 minimum (AC). |
|
3. |
The motor load has an inrush current 6 times steady current. |
| The above ratings were tested under the following conditions: |
| |
1. |
Ambient temperature:20±2°C |
| |
2. |
Ambient humidity:65±5%RH |
| |
3. |
Switching frequency:7 times/min |
Characteristics
| Permissible operating frequency |
Mechanical: 20 operations/min max.
Electrical: 7 operations/min max. |
| Insulation resistance |
100 MΩ min. (500 VDC) |
| Dielectric strength |
2,000 VAC, 50/60 Hz, for 1 min between terminals of the same polarity
2,000 VAC, 50/60 Hz, for 1 min between terminals of the different polarity
4,000 VAC, 50/60 Hz, for 1 min between charged metal parts and the ground terminal |
| Vibration resistance |
Malfunction:10 to 55 Hz, 1.5-mm double amplitude |
| Shock resistance |
Malfunction: 300 m/s2
Destruction: 500 m/s2 |
| Durability |
Mechanical: 50,000 operations min.
Electrical: 10,000 operations min. |
| Inrush current |
100 A max. (8.3 ms max.) |
| Ambient operating temperature |
–20 to +55°C (with no icing or condensation) |
| Ambient operating humidity |
45 to 85%RH |
| Note: |
|
Consult your OMRON representative for details of performance characteristics with respect to individual standards. |
| Note: 1. |
All units are in millimeters unless otherwise indicated. |
| 2. |
AThe following illustrations and drawings are for 2 poles (DPST) models, 1 pole (SPST) models have single side terminals. |
| 3. |
AUnless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. |
| Solder Terminals |
 |
A8L-11-11N1 A8L-21-11N1
A8L-11-11N2 A8L-21-11N2
A8L-11-11N3 A8L-21-11N3
A8L-11-11N6 A8L-21-11N6
|
 |
 |
Operating Characteristics
| No. of poles |
1 (SPST)
|
2 (DPST)
|
| Operating force(OF) |
2.16±1.18 N
{220±120 gf} |
3.92±2.45 N
{400±250 gf} |
| PCB Terminals |
 |
A8L-11-12N1 A8L-21-12N1
A8L-11-12N2 A8L-21-12N2
A8L-11-12N3 A8L-21-12N3
A8L-11-12N6 A8L-21-12N6 |
 |
 |
Operating Characteristics
| No. of poles |
1 (SPST)
|
2 (DPST)
|
| Operating force(OF) |
2.16±1.18 N
{220±120 gf} |
3.92±2.45 N
{400±250 gf} |
|
| Right-angled PCB Terminals |
 |
A8L-11-13N1 A8L-21-13N1
A8L-11-13N2 A8L-21-13N2
A8L-11-13N3 A8L-21-13N3
A8L-11-13N6 A8L-21-13N6 |
 |
 |
Operating Characteristics
| No. of poles |
1 (SPST)
|
2 (DPST)
|
| Operating force(OF) |
2.16±1.18 N
{220±120 gf} |
3.92±2.45 N
{400±250 gf} |
|
| Left-angled PCB Terminals |
 |
A8L-11-14N1 A8L-21-14N1
A8L-11-14N2 A8L-21-14N2
A8L-11-14N3 A8L-21-14N3
A8L-11-14N6 A8L-21-14N6 |
 |
 |
Operating Characteristics
| No. of poles |
1 (SPST)
|
2 (DPST)
|
| Operating force(OF) |
2.16±1.18 N
{220±120 gf} |
3.92±2.45 N
{400±250 gf} |
|
| Quick-connect Terminals #187 |
 |
A8L-11-15N1 A8L-21-15N1
A8L-11-15N2 A8L-21-15N2
A8L-11-15N3 A8L-21-15N3
A8L-11-15N6 A8L-21-15N6 |
 |
 |
Operating Characteristics
| No. of poles |
1 (SPST)
|
2 (DPST)
|
| Operating force(OF) |
2.16±1.18 N
{220±120 gf} |
3.92±2.45 N
{400±250 gf} |
|
|
Switches
Product Lineup
Support
Related Links


|