A8G Reset Rocker Switch Rocker Switch with Reset Function for High Current Switching Energy-saving reset function triggered with external signals. Incorporates unique switching mechanism switching 20 A with excellent inrush-current durability. Double-pole, double-throw (DPDT) contact. Contact gap of 3 mm minimum. Approved by UL, cUL, and IEC. Bears the CE marking.

Item	A8G-107-1-24
Contact configuration	DPDT
Flange color (case)	Black
Cap color	Black

Ratings
  Contact

Rated load	Non-inductive resistive load:	20 A at 250 VAC
	Non-inductive lamp load:	10 A at 250 VAC
	Inductive load:	8 A at 250 VAC
	Inductive motor load:	8 A at 250 VAC

Note:	1.	The non-inductive lamp load has an impulse current ten times the normal current.
	2.	The inductive load has a power factor of 0.4 minimum (AC).
	3.	The motor load has an impulse current 6 times the normal current.
The above ratings were tested under the following conditions:
	1.	Ambient temperature:20 ±2ºC
	2.	Ambient humidity:65% ±5%
	3.	Switching frequency:7 times/min

  Reset Coil

Rated voltage (operating voltage range)	Reset voltage (coil temperature: 20ºC ±2ºC)	Rated energized current (coil temperature: 20ºC ±2ºC)	Coil resistance (coil temperature: 20ºC ±2ºC)	Permissible voltage applied period
24 VDC±10% (21.6 to 26.4 VDC)	21.6 V max.	185 mA±20%	130 Ω±20%	100 ms to 1 s

Note:	1.	Current must not flow for more than 10 s, otherwise the performance of the coil may be affected.
	2.	If a semiconductor element is used to control the reset coil, the residual voltage caused by leakage current must be 2.4 VDC max.

Characteristics

Permissible operating speed	1 to 500 mm/s
Permissible operating frequency	Mechanical: Switching frequency: 7 times/min.; Coil operation: 7 times/min Electrical: 20 operations/min max.
Insulation resistance	100 MΩ min. (500 VDC)
Dielectric strength	2,000 VAC, 50/60 Hz, for 1 min between terminals of the same polarity 2,000 VAC, 50/60 Hz, for 1 min between terminals of the different polarity 4,000 VAC, 50/60 Hz, for 1 min between charged metal parts and the ground terminal
Vibration resistance	Malfunction: 10 to 55 Hz, 1.5-mm double amplitude (with a contact separation time of 1 ms max.)
Shock resistance	Malfunction: 98 m/s2(10G) (with a contact separation time of 1 ms max.) Destruction: 500 m/s2 (50G) max.
Life expectancy	Mechanical: Switching operation: 50,000 times min.; Coil operation: 10,000 times min. Electrical: Switching operation: 100,000 times min.; Coil operation: 10,000 times min.
Contact release time (see note)	100 ms max.
Ambient temperature	Operating: -10ºCC to 55ºC(with no icing or condensation) Storage: -25ºC to 60ºC (with no icing or condensation)
Ambient humidity	Operating: 45% to 85% Storage: 45% to 85%

Note:

Contact release time is the period of time during which contacts 1 and 2 and contacts 4 and 5 are released after voltage is imposed on the coil.

Note:

All units are in millimeters unless otherwise indicated.

A8G

Operating Characteristics

OF (operating force)	19.6 N (2,000 gf)