Sealed Rotary DIP Switch A6A | OMRON Electronic Components Web

English

Rotary Types

A6A Sealed Rotary DIP Switch

Sealed Rotary DIP Switch with Various selections for Code-setting.

Top/Side-visible. Flat/Cone shaped/Extendedactuator models available.
A slider lock and rotating PCB mechanism ensure stable contact reliability.
Sealed structure equivalent to IP64 (IEC-60529) prevents flux penetration and provides high contact reliability even in dusty locations.

2DCAD
3DCAD

Updated October 24, 2011

This web page provides an excerpt from a datasheet.
Refer to Datasheetand other applicable documents for more information.

	Type (actuation color)
No. of switching positions	Output code	Quantity per boxx

Cone type (black)

Flat type (white)

Extended actuator
wheel type (white)

Wheel type
(White with Black Wheel)

BCD Decimal

100

A6A-10R

A6A-10RF

A6A-10RS

A6A-10RW

BCD Decimal complement

A6A-10C

A6A-10CF

A6A-10CS

A6A-10CW

BCD Hexadecimal

A6A-16R

A6A-16RF

A6A-16RS

A6A-16RW

BCD Hexadecimal complement

A6A-16C

A6A-16CF

A6A-16CS

A6A-16CW

Note:	1. Contact your OMRON sales representative to request special markings or designations.
	2. Order in multiples of the package quantity.

Rating	0.1 A at 28 VDC, 1 mA (minimum current) at 5 VDC
Ambient operating temperature	–10 to 70ºC 60%RH max. (with no icing or condensation)
Ambient operating humidity	45% to 85%RH (at 5 to 35°C)
Insulation resistance	10 MΩ min. (at 250 VDC)
Contact resistance	200 mΩ max. (initial value)
Dielectric strength	250 VAC for 1 min between terminals
Vibration resistance	Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance	Malfunction: 300 m/s² min.
Durability	Electrical: 2,000 steps min.
Operating torque	1.18 to 2.45 × 10⁻² N·m {1.2 to 2.5 gf·m}
Weight	Cone: Approx. 0.8 g Flat: Approx. 0.7 g Extended actuator: Approx. 0.8g Wheel: Approx. 1.0g

Output Codes
10-position Models Note:"" indicates that the internal switch is ON.	16-position Models Note:"" indicates that the internal switch is ON.

Note:	1. All units are in millimeters unless otherwise indicated.
	2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Cone Type, 10 Positions A6A-10R A6A-10C

Cone Type, 16 Positions A6A-16R A6A-16C

Flat Type, 10 Positions A6A-10RF A6A-10CF

Flat Type, 16 Positions A6A-16RF A6A-16CF

Extended Actuator Type, 10 Positions A6A-10RS A6A-10CS

Extended Actuator Type, 16 Positions A6A-16RS A6A-16CS

Wheel Type, 10 Positions A6A-10RW A6A-10CW

Wheel Type, 16 Positions A6A-16RW A6A-16CW

PCB Dimensions (Top View)
(Single-sided PCB, t = 1.2 to 1.6)

Internal Connections
Contact Form (Top View)

Precautions

Be sure to read the Safety Precautions common to all DIP Switches for correct use.