OMRON

OMRON Electronic Components Web|English

Relays
Sensors
Foundry
By Part# / Name
By Category
Switches
Micro Sensing Devices
Facial Image Sensing Technology
Connectors
Optical Communication Devices

Sealed Basic Switches

Search by product list

D2SW-P Sealed Subminiature Basic Switch

Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series.

  • Sealing by using rubber packing means the switch can be used in dust-proof or in temporary water-proof environments (IEC IP67).
  • Switch rating of 2A at 250 VAC possible with a single-leaf movable spring. Models for micro loads are also available.
  • Solder, quick-connect terminals (#110), PCB terminals and molded lead wires are available. Even-pitched PCB terminals are also standardized.
  • RoHS Compliant
This web page provides an excerpt from a datasheet.
Refer to Datasheetand other applicable documents for more information.
OrderingInformationRatings / CharacteristicsDimensions
Terminal
Rating    Actuator
 Solder terminals PCB terminals Quick-connect
terminals(#110)		 Molded lead wires
2A Pin plunger D2SW-P:Ordering Information1 D2SW-P2H D2SW-P2D D2SW-P2T D2SW-P2M
Hinge lever D2SW-P:Ordering Information2 D2SW-P2L1H D2SW-P2L1D D2SW-P2L1T D2SW-P2L1M
Hinge roller lever D2SW-P:Ordering Information3 D2SW-P2L2H D2SW-P2L2D D2SW-P2L2T D2SW-P2L2M
Simulated roller lever D2SW-P:Ordering Information4 D2SW-P2L3H D2SW-P2L3D D2SW-P2L3T D2SW-P2L3M
0.1A Pin plunger D2SW-P:Ordering Information1 D2SW-P01H D2SW-P01D D2SW-P01T D2SW-P01M
Hinge lever D2SW-P:Ordering Information2 D2SW-P01L1H D2SW-P01L1D D2SW-P01L1T D2SW-P01L1M
Hinge roller lever D2SW-P:Ordering Information3 D2SW-P01L2H D2SW-P01L2D D2SW-P01L2T D2SW-P01L2M
Simulated roller lever D2SW-P:Ordering Information4 D2SW-P01L3H D2SW-P01L3D D2SW-P01L3T D2SW-P01L3M
Note: Consult your OMRON sales representative for details on SPST-NO and SPST-NC models.

Contact Form
SPDT SPST-NC
(Molded lead wire models only)		 SPST-NO
(Molded lead wire models only)
D2SW-P:Ordering Information5 D2SW-P:Ordering Information5 D2SW-P:Ordering Information5
Note: Lead wire colors are indicated in perentheses.
Back to top
OrderingInformationRatings / CharacteristicsDimensions
Ratings
Model
Rated voltage
Resistive load
D2SW-P2
 30 VDC 2 A
250 VAC
D2SW-P01
 30 VDC 0.1 A
125 VAC
Note: The ratings values apply under the following test conditions.
Ambient temperature: 20 ±2ºC
Ambient humidity: 65 ±5%
Operating frequency: 20 operations/min

Characteristics
Item
Model
D2SW-P2
D2SW-P01
Operating speed 0.1 mm to 500 mm/s (pin plunger models)
Operating frequency Mechanical: 120 operations/min max.
Electrical: 20 operations/min max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance (initial value) Terminal models:50 mΩ max.
Molded lead wire models:100 mΩ max. 		Terminal models:100 mΩ max.
Molded lead wire models:150 mΩ max.
Dielectric strength
(see note 2)		 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarities
 600 VAC, 50/60 Hz for 1 min between terminals of the same polarities
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts
Vibration resistance
(see note 3)		 Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
(see note 3)		 Destruction: 1,000 m/s2 {approx. 100G} max.
Malfunction: 300 m/s2 {approx. 30G} max.
Durability
(see note 4)		 Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 50,000 operations min.
(20 operations min.)		 Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 200,000 operations min.
(20 operations min.)
Degree of protection IEC IP67 (See note 5)
(excluding the terminals on terminal models)
Degree of protection against electric shock Class Ⅰ
Proof tracking index (PTI) 175
Ambient operating temperature -20ºC to 70ºC (at ambient humidity of 60% max.)
(with no icing or condensation)
Ambient operating humidity 85% max. (for 5ºC to 35ºC)
Weight Approx.2 g (pin plunger models with terminals)
Note: 1. The data given above are initial values.
  2. The dielectric strength shown in the table indicates a value for models with a Separator.
  3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values apply at the total travel position. Contact opening or closing time is within 1 ms.
  4. Consult your OMRON sales representative for testing conditions.
  5. The test to meet standards checks for water intrusion after immersion for 30 minutes. The test does not check for switching operation underwater. Refer to Datasheet's "Degree of Protection" of "Instructions for Correct Use" .
Back to top
OrderingInformationRatings / CharacteristicsDimensions
Dimensions and Operating Characteristics
Note: 1. All units are in millimeters unless otherwise indicated.
  2. The following illustrations and drawings are for solder terminal models. Refer to page 229 for details on models with quick-connect terminals (#110) or PCB terminals or molded lead wires.
  3. The in the model number is for the contact form code or the terminal code.
  4. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
  5. The operating characteristics are for operation in the A direction ( ).
Pin Plunger Models
D2SW-P2
D2SW-P01		 D2SW_P:Dimensions1
D2SW_P:Dimensions2
OF max.
RF min.		 1.8 N {183 gf}
0.2 N {20 gf}
PT max.
OT min.
MD max.		 0.6 mm
0.4 mm
0.15 mm
OP 8.4± 0.3 mm


Hinge Lever Models
D2SW-P2L1
D2SW-P01L1		 D2SW_P:Dimensions3
D2SW_P:Dimensions4
OF max.
RF min.		 0.6 N {61 gf}
0.05 N {5 gf}
OT min.
MD max.		 0.8 mm
0.8 mm
FP max.
OP		 13.6 mm
8.8± 0.8 mm


Hinge Roller Lever Models
D2SW-P2L2
D2SW-P01L2		 D2SW_P:Dimensions5
D2SW_P:Dimensions6
OF max.
RF min.		 0.6 N {61 gf}
0.05 N {5 gf}
OT min.
MD max.		 0.8 mm
0.8 mm
FP max.
OP		 19.3 mm
14.5± 0.8 mm


Simulated Roller Lever Models
D2SW-P2L3
D2SW-P01L3		 D2SW_P:Dimensions7
D2SW_P:Dimensions8
OF max.
RF min.		 0.6 N {61 gf}
0.05 N {5 gf}
OT min.
MD max.		 0.8 mm
0.8 mm
FP max.
OP		 15.5 mm
10.7± 0.8 mm
Back to top
Related Links
Technology
Application Guide