OMRON

OMRON Electronic Components Web|English

Relays
Sensors
Foundry
By Part# / Name
By Category
Switches
Micro Sensing Devices
Face Recognition Sensor
Connectors
Optical Communication Devices

Mass Flow Sensor

Search by product list

D6F-W□A1 MEMS Flow Sensor

A Compact Sensor That Uses OMRON's
Unique Flow Path Structure for Highperformance
Flow Rate Measurement.

  • Anti-dust performance enhanced by OMRON's
    unique three-dimensional flow path structure.
  • High accuracy of ±5% FS.
This web page provides an excerpt from a datasheet.
Refer to Datasheetand other applicable documents for more information.
OrderingInformationRatings / CharacteristicsDimensions
Sensor
case material
Applicable Gas
Flow Range
Model
0 to 1 m/s D6F-W01A1 25
0 to 4 m/s D6F-W04A1


Cable(Order separately)
Contact
Wires
Housing
Model
SZH-002T-P0.5 AWG 26
(Length 200mm)		 ZHR-3 D6F-W CABLE
Back to top
OrderingInformationRatings / CharacteristicsDimensions
Absolute maximum rating
Item
Symbol
Rating
Unit
Power Supply Voltage Vcc 26.4 VDC
Output Voltage Vout 6 VDC


Characteristics
Item Model number
D6F-W01A1
D6F-W04A1
Flow rate 0 to 1 m/s 0 to 4 m/s
This is the flow rate at 25°C and 1 atmosphere.
Case material Thermoplastic resin
Operating conditions Applicable
fluid		 Air
Operating
temperature		 −10 to 60°C (with no condensation or icing)
Operating
humidity		 85% max. (with no condensation or icing)
Storage
temperature		 −40 to 80°C (with no condensation or icing)
Storage
humidity		 85% max. (with no condensation or icing)
Power supply voltage 10.8 to 26.4 VDC
Output signal Analog output: 1 to 5 VDC, Load resistance: 10 kΩ (non-linear output)
Current consumption Without load: Vcc = 12 to 24 VDC, Vss = 0 V, 25 C, 15 mA max.
Insulation resistance Between Sensor outer cover and lead terminals: 20 MΩ min.(at 500 VDC)
Withstand voltage Between Sensor outer cover and lead terminals: 500 VAC,50/60 Hz for 1 min (leakage current: 1 mA max.)
Note: The flow rate is the value calculated from the mass flow rate in OMRON's specified
48-mm-dia. wind tunnel. It does not indicate the flow rate determined by the
Measurement Law of Japan.
Confirm operation in the application environment before using the D6F.


Connection
 
For this sensor, please use connector manufactured by JST Mfg. Co., Ltd.
Contact/Wire
Contact : SZH-002T-P 0.5
Wire : AWG#28-#26
or
Contact : SZH-003T-P 0.5
Wire : AWG#32-#28
Housing : ZHR-3
Back to top
OrderingInformationRatings / CharacteristicsDimensions
  (Unit :mm)

Sensor
D6F-W01A1
D6F-W04A1

Cable (Order Separately)
D6F-W CABLE
Back to top
Related Links
Technology
Application Guide
© Copyright OMRON Corporation 1996-2009. All Rights Reserved.