OMRON

OMRON Electronic Components Web|English

Relays
Sensors
Foundry
By Part# / Name
By Category
Switches
Micro Sensing Devices
Face Recognition Sensor
Connectors
Optical Communication Devices

Mass Flow Sensor

Search by product list

D6F-P MEMS Flow Sensor

A Compact, High-performance Flow
Sensor with Dust Segregation Structure.

  • Anti-dust performance is improved using the Cyclon method.
  • A model that mounts directly to PCB is available.
  • High accuracy of ±5% FS.
This web page provides an excerpt from a datasheet.
Refer to Datasheetand other applicable documents for more information.
OrderingInformationRatings / CharacteristicsDimensions
(Please contact to local OMRON representatives for delivery.)
Wiring
Model
PCB mounting type D6F-P0010A1
Connector D6F-P0010A2
Back to top
OrderingInformationRatings / CharacteristicsDimensions
Absolute maximum rating
Item
Symbol
Rating
Unit
Power Supply Voltage Vcc 10 VDC
Output Voltage Vout 4 VDC


Performance
Item
Model
number
D6F-P0010A1
D6F-P0010A2
Flow rate 0 to 1 L/min
Joints Barb joint (Inside diameter: 2.5 mm,
Maximum external diameter: 4.9 mm,
Minimum external diameter: 4 mm)
Case material Thermoplastic resin
Applicable fluid Air
Operating
conditions		 Operating
temperature		 −10 to 60°C (with no condensation or icing)
Operating
humidity		 85% max. (with no condensation or icing)
Storage
temperature		 −40 to 80°C (with no condensation or icing)
Storage humidity 85% max. (with no condensation or icing)
Power supply voltage 4.75 to 5.25 VDC
Output signal 0.5 to 2.5 VDC
Output voltage accuracy ±5% F.S.
Fluctuation due to
temperature characteristics		 ±5% F.S. (−10 to 60°C)
Current consumption Without load: Vcc = 5.0 VDC, 15 mA max.
Insulation resistance Between Sensor outer cover and lead
terminals: 20 MΩ min. (at 500 VDC)
Withstand voltage Between Sensor outer cover and lead
terminals: 500 VAC, 50/60 Hz min. for 1
min (leakage current: 1 mA max.)


Back to top
OrderingInformationRatings / CharacteristicsDimensions
  (Unit :mm)

PCB mounting type
D6F-P0010A1

Detailed View of A
 Recommended Dimensions
for Connector Mounting Holes
Soldering Conditions
When using a soldering gun, heat for 3 s maximum with the soldering gun tip at 350°C ±10°C.
Note: Be careful to not allow flux to get inside of the Sensor.
  Connector type
D6F-P0010A2

  Detailed View of A
 
Use the following connectors from J.S.T. Mfg. Co., Ltd. to connect the D6F.
·Pressure-welded connectors Socket: 03SR-3S
  Wires: AWG30
·Crimp connectors Contacts: SSH-003T-P0.2
  Wires: AWG32 to AWG28



  Lead Wire(Accessory)
D6F-CABLE2
Back to top
Related Links
Technology
Application Guide
© Copyright OMRON Corporation 1996-2009. All Rights Reserved.