English
JAPANESE TOP |
 |
 |
|
||||
 |
 |
 |
|||||
 |
 |
Power Relays
G6RL PCB Relay
Low-profile power relay with maximum switching of 10 A
- Low profile: 12.3 mm in height
- Max. switching capacity: 2,500 VA (NO)
- Dielectric strength: 5 kV
- Clearance and creepage distance: 10 mm.
- Models with high shock resistance (250 m/s2) are available.
- Models for P1 load (2 × 200 W lamps parallel to ignition transformer) are available.
 |
|
Updated March 23, 2009
|
This web page provides an excerpt from a datasheet.
Refer to Datasheetand other applicable documents for more information.
Refer to Datasheetand other applicable documents for more information.
| Classification | Enclosure rating | Contact form | Contact material | |
|---|---|---|---|---|
| AgSnIn | AgNi | |||
| Standard | Flux protection | SPST-NO | G6RL-1A-ASI | G6RL-1A |
| SPDT | G6RL-1-ASI | G6RL-1 | ||
| Fully sealed | SPST-NO | G6RL-1A4-ASI | --- | |
| SPDT | G6RL-14-ASI | --- | ||
| P1 Load | Flux protection | SPST-NO | G6RL-1A-ASI-PL | --- |
| SPDT | G6RL-1-ASI-PL | --- | ||
| Shock resistance | Flux protection | SPST-NO | --- | --- |
| SPDT | G6RL-1-SR-ASI | --- | ||
| Fully sealed | SPST-NO | --- | --- | |
| SPDT | G6RL-14-SR-ASI | --- | ||
| Note: | When ordering, add the rated coil voltage to the model number. Example: G6RL-1A  |
| Classification | Standard, P1 load | |||||
|---|---|---|---|---|---|---|
| Rated voltage | 3 VDC | 5 VDC | 6 VDC | 12 VDC | 24 VDC | 48 VDC |
| Rated current | 73.3 mA | 44.0 mA | 36.7 mA | 18.3 mA | 9.2 mA | 5.0 mA |
| Coil resistance | 40 Ω | 113 Ω | 163 Ω | 654 Ω | 2,618 Ω | 9,600 Ω |
| Must operate voltage | 70% max. of rated voltage | |||||
| Must release voltage | 10% min. of rated voltage | |||||
| Max. voltage | 150% of rated voltage | |||||
| Power consumption | Approx. 220 mW | Approx. 240 mW | ||||
| Classification | Shock resistance | |||||
|---|---|---|---|---|---|---|
| Rated voltage | 3 VDC | 5 VDC | 6 VDC | 12 VDC | 24 VDC | |
| Rated current | 101 mA | 60.2 mA | 50.1 mA | 25.2 mA | 12.6 mA | |
| Coil resistance | 30 Ω | 83 Ω | 120 Ω | 476 Ω | 1,912 Ω | |
| Must operate voltage | 80% max. of rated voltage | |||||
| Must release voltage | 10% min. of rated voltage | |||||
| Max. voltage | 150% of rated voltage(23ºC) | |||||
| Power consumption | Approx. 300 mW | |||||
| Note: | 1. | The above items are measured at a coil temperature of 23ºC. |
| 2. | The tolerance of the rated current is ±10%. |
Contact Ratings
| Load | Resistive load (cos φ = 1) |
|---|---|
| Rated load (see note 1.) | 10 A at 250 VAC, NO resistive load 8 A at 250 VAC, resistive load 5 A at 30 VDC, resistive load |
| Rated carry current | 10 A at 250 VAC 5 A at 30 VDC |
| Max. switching voltage | 400 VAC, 300 VDC |
| Max. switching current | NO: 10 A, NC: 8 A |
| Max. switching power | NO: 2,500 VA, NC: 2,000 VA 150 W |
| Failure rate (reference value) | 10 mA at 5 VDC (P Level) (see note 2. ) |
| note: | 1. | G6RL-1(A), G6RL-1(A)4-ASI: 8 A 250 VAC, resistive load; 5 A 24 VDC resistive load. |
| 2. | P level: λ 60 = 0.1 × 10-6 / operations |
Characteristics
| Contact resistance | 100 mΩ max. | ||||
|---|---|---|---|---|---|
| Operate time | 10 ms max.(SR Models : 15 ms max.) | ||||
| Release time | 5 ms max. | ||||
| Insulation resistance | 1,000 MΩ min. (at 500 VDC) | ||||
| Dielectric strength | 5,000 VAC, 50/60 Hz for 1 min between coil and contacts 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity SR Models: 250 ms2 (NO and NC) when not energized |
||||
| Impulse withstand voltage | 10 kV between coil and contacts (1.2 × 50 µs) | ||||
| Vibration resistance |
|
||||
| Shock resistance | Destruction: 1,000 m/s2 Malfunction: 200 m/s2 NO, 50 m/s2 NC when not energized SR Models: 250 ms2 (NO and NC) when not energized |
||||
| Endurance (Mechanical) | 10,000,000 operations min. (at 18,000 operations/h) | ||||
| Ambient temperature | Operating: -40ºC to 85ºC (with no icing) | ||||
| Ambient humidity | Operating: 5% to 85% | ||||
| Weight | Approx. 7.8 g |
Other data
| Construction of protection | Flux protection | Fully sealed | ||
|---|---|---|---|---|
| Insulation material group | IIIa | |||
| Rated insulation voltage | 250 V | |||
| Pollution degree | 3 | 2 | ||
| Rated voltage system | 250 V | 400 V | ||
| Over-voltage category | III | |||
| Creepage distance | 10 mm | |||
| Clearance distance | 10 mm | |||
| RoHS | Compliant | |||
| Tracking index of relay base | PTI 250 | |||
| Flammability class according to UL94 |
V-0 | |||
| Flammability-flame GWFI (IEC 60695-2-12) GWIT (IEC 60695-2-13) |
|
|||
| Ball pressure test (IEC 60695-10-2) |
170ºC | |||
| Note: All units are in millimeters unless otherwise indicated. G6RL-1A(-ASI) G6RL-1A4(-ASI)  |
|
| Terminal Arrangement / Internal Connections (BOTTOM VIEW)  |
Mounting Holes (BOTTOM VIEW) Tolerance: ±0.1  Note: Indicates average dimensions. |
G6RL(-ASI) G6RL-14(-ASI)  |
|
| Terminal Arrangement / Internal Connections (BOTTOM VIEW)  |
Mounting Holes (BOTTOM VIEW) Tolerance: ±0.1  Note: Indicates average dimensions. |
Related Links
© Copyright OMRON Corporation 1996-2009. All Rights Reserved.
