Surface-mounting Relay G6L | OMRON Electronic Components Web

G6L Surface-mounting Relay

Extremely Thin SPST-NO Flat Relay, One of the Thinnest Relays in the World

Dimensions of 7.0(W)×10.6(L) ×4.2 mm(H)(SMD) or 3.8 mm(H) (TH) represent a reduction of approximately 20% in mounting area and approximately 67% in volume compared with the OMRON G5V-1, for higher-density mounting.
Ensures a dielectric strength between coil and contacts (1,000 VAC), and conforms to FCC Part 68 (i.e., withstanding an impulse withstand voltage of 1.5 kV for 10 x 160µs). High dielectric strength between contacts of same polarity (750 VAC).
Surface-mounting relays are also available.
Single-winding latching models to save energy.
Conforms to UL60950 (File No. E41515) / CSA C22.2 No. 60950 (File No. LR31928).
Use of lead completely eliminated.

Datasheet

2DCAD
3DCAD

Updated March 23, 2009

This web page provides an excerpt from a datasheet.
Refer to Datasheetand other applicable documents for more information.

Classification			Single-side stable
SPST-NO	Fully sealed	Through-hole terminal	G6L-1P
SPST-NO	Fully sealed	Surface-mounting terminal	G6L-1F

Note:	1.	When ordering, add the rated coil voltage to the model number.
		Example: G6L-1P
	2.	When ordering tape packing, add "-TR" to the model number.
		Example: G6L-1F
		Be sure since "-TR" is not part of the relay model number, it is not marked on the relay case.

Stick Packing and Tape Packing

1. Stick Packing.
Relays in stick packing are arranged so that the orientation markof each Relay is on the left side.
Always confirm that the Relays are in the correct orientation whenmounting the Relays to the PCBs.
G6L:Ordering Information1

Stick length: 552 mm (stopper not included)
No. of Relays per stick: 50

2. Tape Packing (Surface-mounting Terminal Relays)

When ordering Relays in tape packing, add the suffix "-TR" to the model number, otherwise the Relays in stick packing will be provided.

Tape Type	: TB2412R (Refer to EIAJ (Electronic Industries Association of Japan))
Reel type	: R24D (Refer to EIAJ (Electronic Industries Association of Japan))
Relays per Reel	: 1,000

1. Direction of Relay Insertion

2. Reel Dimensions

3. Carrier Tape Dimensions

Coil Ratings
Single-side Stable Relays (G6L-1P, G6L-1F)

Rated voltage	3 VDC	4.5 VDC	5 VDC	12 VDC	24 VDC
Rated current	60.0 mA	40.0 mA	36.0 mA	15.0 mA	9.6 mA
Coil resistance	50.0 Ω	112.5 Ω	139.0 Ω	800.0 Ω	2,504.0 Ω
Must operate voltage	75% max. of rated voltage
Must release voltage	10% min. of rated voltage
Maximum. voltage	150% of rated voltage				130% of rated voltage
Power consumption	Approx. 180 mW				Approx. 230 mW

NOTE:	1.	The rated current and coil resistance are measured at a coil temperature of 23ºC with a tolerance of ±10%.
	2.	The operating characteristics are measured at a coil temperature of 23ºC.
	3.	The maximum voltage is the highest voltage that can be imposed on the relay coil.

Contact Ratings

Item	Load

Resistive load

Contact mechanism

Single crossbar

Rated load

0.3 A at 125 VAC; 1 A at 24 VDC

Rated carry current

Max. switching voltage

125 VAC, 60 VDC

Max. switching current

Characteristics

Classification
Item	Model

Single-side Stable Relays

G6L-1P, G6L-1F

Contact resistance (See note 1.)

100 mΩ max.

Operating time (See note 2.)

5 ms max. (approx. 1.1 ms)

Release time (See note 2.)

5 ms max. (approx. 0.4 ms)

Insulation resistance (See note 3.)

1,000 MΩ min. (at 500 VDC)

Dielectric strength

Coil and contacts

1,000 VAC, 50/60 Hz for 1 min

Contacts of same polarity

750 VAC, 50/60 Hz for 1 min

Impulse withstand voltage

Coil and contacts

1,500 VAC, 10 x 160 µs

Vibration resistance

Destruction

10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude)

Malfunction

10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude)

Shock resistance

Destruction

1,000 m/s²

Malfunction

100 m/s²

Endurance

Mechanical

5,000,000 operations min. (at 36,000 operations/hour)

Electrical

100,000 operations min. (with a rated load at 1,800 operations/hour)

Failure rate (P level) (See note 4.)

1 mA at 5 VDC

Ambient temperature

Operating : -40ºC to 70ºC (with no icing or condensation)

Ambient humidity

Operating : 5% to 85%

Weight

Approx. 0.6 g

NOTE:	1.	The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.
	2.	Values in parentheses are actual values.
	3.	The insulation resistance was measured with a 500-VDC Megger Tester applied to the same parts as those used for checking the dielectric strength.
	4.	This value was measured at a switching frequency of 120 operations/min. This value may vary, depending on switching frequency, operating conditions, expected reliability level of the relay, etc. It is always recommended to double-check relay suitability under actual load conditions.
	5.	The above values are initial values.